Filters

Engine Parts (Parilla)

Reed Petal for Leopard MY09 and X30
$ 17.09 USD

Reed Petal for Leopard MY09 and X30

Leopard MY09 and X30 Reed Petal.  Sold Individually. 

$ 17.09 USD
.22/.23mm Carbon ROK Reeds
$ 43.31 USD

.22/.23mm Carbon ROK Reeds

IAME Carbon fiber reeds 22 +0.01

$ 43.31 USD
1 Piece Motor Mount Clamp
$ 58.00 USD

1 Piece Motor Mount Clamp

Italian Motors one piece billet low profile motor mount clamp, designed to minimize vibration.  The three-clamp design will fit 30/32mm tubing on L...

View full details
$ 58.00 USD
OEM IAME 12V Kart Battery
$ 39.98 USD

OEM IAME 12V Kart Battery

OEM IAME 12V Kart Battery sealed lead acid battery. ***WHILE QUANTITIES LAST*** ***FREE SHIPPING DOES NOT APPLY TO THIS PRODUCT, PLEASE CONTA...

View full details
$ 39.98 USD
Leopard Bearing Shim
$ 3.56 USD

Leopard Bearing Shim

Leopard/Reedjet Main bearing shim - available in 0.15 and 0.10.

$ 3.56 USD
Bottom Cage - Leopard
Save 20%
$ 45.41 USD
$ 36.33 USD

Bottom Cage - Leopard

Lower Conrod Roller bearing for Leopard (18 x 24 x 15) For Leopard MY09 Bottom Cage click here

$ 45.41 USD
$ 36.33 USD
Save 20%
Carb to Manifold Gasket
$ 3.56 USD

Carb to Manifold Gasket

Parilla carburetor to manifold gasket.

$ 3.56 USD
Clutch Bearing - Leopards, Gazelle, X30, and Dragon
$ 13.33 USD

Clutch Bearing - Leopards, Gazelle, X30, and Dragon

Clutch hub roller bearing for all Leopards, Gazelle, X30, and Dragon

$ 13.33 USD
Clutch Cover - Leopard
Save 20%
$ 62.00 USD
$ 49.60 USD

Clutch Cover - Leopard

Leopard clutch cover. For Leopard MY09 Clutch Cover click here

$ 62.00 USD
$ 49.60 USD
Save 20%
Clutch Cover - Leopard MY09
$ 142.36 USD

Clutch Cover - Leopard MY09

Clutch Cover for Leopard MY09 and Dragon. Bare Clutch Cover (Bearing and Seeger not included)

$ 142.36 USD
Clutch Drum - Leopard
$ 70.00 USD

Clutch Drum - Leopard

Leopard Clutch Drum.

$ 70.00 USD
Clutch Drum - MY09 and X30
$ 76.08 USD

Clutch Drum - MY09 and X30

Leopard MY09 and X30 Clutch Drum For Leopard Clutch Drum click here

$ 76.08 USD
Complete Reedcage - Leopard
Save 20%
$ 75.63 USD
$ 60.50 USD

Complete Reedcage - Leopard

Complete leopard reed cage (reedcage, reeds, screws, clamping plates)

$ 75.63 USD
$ 60.50 USD
Save 20%
Concave Washer
$ 4.86 USD

Concave Washer

Internal Clutch concave/coned locking washer for Leopard.

$ 4.86 USD
Copper Washer
$ 2.45 USD

Copper Washer

Small copper washer for cylinder head temperature sensor plug (B-25840) For all Parilla engines

$ 2.45 USD
Copper Washer for water fitting
$ 3.42 USD

Copper Washer for water fitting

This is the copper crush washer used with B-25830A (water fitting).

$ 3.42 USD
Countershaft Retaining Cover
$ 17.09 USD

Countershaft Retaining Cover

Cover for Countershaft

$ 17.09 USD
Countershaft Roller Bearing
$ 11.28 USD

Countershaft Roller Bearing

Roller Bearing for Stater countershaft

$ 11.28 USD
Leopard Crank Case Seal
$ 17.64 USD

Leopard Crank Case Seal

IAME Leopard Crank Case seal

$ 17.64 USD
Crank Half Ign. side
$ 234.44 USD

Crank Half Ign. side

Leopard Crank Half Ignition side

$ 234.44 USD
Leopard Crank Pin
Sold out
$ 31.22 USD
$ 24.98 USD

Leopard Crank Pin

Leopard Crank Pin 18 x 47mm *Only available as assembly with bearing and washers - Leopard Crank Pin Assembly

$ 31.22 USD
$ 24.98 USD
Sold out
Cylinder Head Washer
$ 1.81 USD

Cylinder Head Washer

Washer for use under cylinder head nut.

$ 1.81 USD
Cylinder Tie Rod - Leopard
$ 13.33 USD

Cylinder Tie Rod - Leopard

Leopard Cylinder Tie Rod 8 x 153mm

$ 13.33 USD
Drive Gear For Leopard Clutch
from $ 40.00 USD

Drive Gear For Leopard Clutch

11 Tooth Clutch drive gear/sprocket for Leopard with screws (also for Gazelle). For Leopard My09, MiniSwift, X30 or Dragon drive gear/sprocket c...

View full details
from $ 40.00 USD