Clutch Puller - For IAME KF2 and newer X30 engine friction hubs. *Compatible with X30 friction hubs labelled with part number #X30125841. For X3...View full details
Tools and Machines - Engine Tooling
The new and improved IM Clutch Puller tool - works for "MY09" Leopards, X30* and 07 Reedsters. Features improved lightweight design and better loo...View full details
Clutch Puller tool (same as B-55614-C) - works for non-"MY09" Leopards, Gazelle and Swift, PRD Fireball engines. Click here if you are looking for...View full details
IAME Motoplat/Ducati puller - also can be used on TM K9ES
TM Primary Crank Gear Puller - TM Kartcross
Kokusan Ignition Puller for Moto
Description Professional crankshafts tuning tool. With this tool you can perform 3 different controls: 1) Centering using tailstocks 2) Centeri...View full details
How to measure with precision the port timing of your 2-stroke engine?So far the measurement of the port timing was a complex procedure. This new P...View full details
Take the guess work out of assembling you cranks. This IAME jig will align the crank halves and drastically reduce the amount of time spent balanci...View full details
Take the guess work out of assembling you cranks. This IAME jig (20/25) will align the crank halves and drastically reduce the amount of time spent...View full details
Crank Pin bushing Tool / Guide for Crank Pin. Available in 18mm, 20mm or 22mm. Pick from drop-down on right. Sold individually.
Piston stop locks piston for replacing ignition, stator, or clutch sprocket.
For servicing your power valve on all KF and Rotax engines.
The unique IM spark plug wrench made from recycled engine conrods. An invaluable tool for any serious mechanic's toolbox.
Locking Tool for Leopard flywheel to remove clutch nuts.
Out of Stock - see alternative here.
IAME Piston Pin Punch - Leopard 125cc
Leopard Circlip Assembly Tool.
IAME Degree Wheel - set your selettra ignition properly use the Iame timing wheel with 10mm crank nut size. 8mm adapter available here.
8mm Timing Group Adapter (early) for the IAME manual degree wheel.
Check the cc on your Parilla cylinder head properly with the IAME Volumeter. Two versions available: 10276 - 60cc Gazelle 10277 -...View full details
IAME Sprocket Puller
SKM Engine Sprocket (9, 10, and 11T) Holder / Spanner.
Crank Disassembling Parts - Part Numbers in Red
Flex Cutter Tool clamps flex to cut properly.
Righetti 125cc Circlip Assembly Tool. *Used with a 15mm hole or pin.
Improved Starter Insert Adapter for Jica, Leopard 08 and MY09, X30, PRD, X125.
AIR DENSITY METER FOR ENGINE TUNING Standard engineering charts readily show the effect of air temperature and barometric pressure on ...View full details
The Coleman self-contained starter packs a lot of power into a small package. The starter has a 5/16” hex and ½” square for socket - Standard rig...View full details
The Piston Pin Removal Tool for 12, 14, 15, 16mm sizing to remove pin easily.
***FREE SHIPPING DOES NOT APPLY TO THIS PRODUCT, PLEASE CONTACT US FOR SHIPPING COST**