Front Hubs

 This is a 75mm 100cc front hub complete with 17mm bearings to mount directly on spindles with a 17mm shaft.  Can be used as a long front hub for ...

This is a 90mm 100cc front hub complete with 17mm bearings to mount directly on spindles with a 17mm shaft.  Can be used as a long front hub for g...

 This is a 75mm 100cc front hub complete with 25mm bearings to mount directly on spindles with a 25mm shaft.  Can be used as a long front hub for ...

 This is an Italkart 95mm 100cc front hub complete with 25mm bearings to mount directly on spindles with a 25mm shaft.  Can be used as a long fron...

 This is a 75mm 100cc front hub complete with 25mm bearings to mount directly on spindles with a 25mm shaft. Can be used as a medium front hu...

 This is a 95mm 100cc front hub complete with 25mm bearings to mount directly on spindles with a 25mm shaft. Can be used as a long front hub for go...

This is a Speedline type 90mm 100cc front hub complete with 25mm bearings to mount directly on spindles with a 25mm shaft.  Can be used as a long ...

90x25mm TaG and Shifter Front Hub with Removable Ring.  Inside bearing spacing is  42mm. Anodized in Black with Italkart Logo.  Sold Individually.

90x25mm TaG Only Front Hub with Removable Ring.  Inside bearing spacing is  52mm. Anodized in Black with Italkart Logo.  Sold Individually.

Italkart KF Front Hub with 25mm bearing and - matches up with the Italkart 2014 KF Disc/Rotor Support and KF Rotor.  Length of 70mm.  Works with  I...

Front hub / rotor support with 17mm bearings to mount directly on spindles with a 17mm shaft. Can be used on left or right.Complete with 40 x 75...

Front hub / rotor support with 17mm bearings to mount directly on spindles with a 17mm shaft. Can be used on left or right.Pairs with Front Hubs...

Front hub / rotor support with 25mm bearings to mount directly on spindles with a 25mm shaft. Can be used on left or right.Pairs with Front Hubs...

 Front hub  42mm x 75mm to mount directly on 125cc hub support, with removable red plastic ring.   Easily pairs with ITL190NR-0...

This is a 75mm 100cc front hub complete with 25mm bearings to mount directly on spindles with a 25mm shaft.  Can be used as a long front hub for g...

42mm x 75mm to mount directly on 125cc hub support (for 25mm spindles), with removable red plastic ring.  Sold individually. Pairs with Front Hub S...

R2 Front Disc/Rotor Support with 25mm bearing and rotor hardware - matches up with the CS-HUB-FRT2575 hub.  Works with  Italkart / Praga / Intrepid...

Italkart KF Front Disc/Rotor Support with 25mm bearing and - matches up with the Italkart 2014 KF Hub and KF Rotor.  Works with  Italkart / Praga /...

Italkart 40mm x 65mm Aluminum Wheel Hub - Can be used on front or rear.  Anodized green, sold individually ITL188 - 40 x 65mm Wheel hub with remova...

Italkart 40mm x 65mm Aluminum Wheel Hub - Can be used on front or rear.  Anodized green, sold individually ITL186 - 40 x 65mm Wheel hub without rem...

Floating front hub / rotor support with 25mm bearings to mount directly on spindles with a 25mm shaft. Can be used on left or right. Anodized tita...

Floating front hub / rotor support with 25mm bearings to mount directly on spindles with a 25mm shaft. Can be used on left or right. Anodized blac...

This is the R2 Front Disc/Rotor Support - without bearings or hardware.  Makes for great spares. Sold individually.

 This is a 100cc front hub with length of 50mm.  No bearings or studs included.