Product Filter

Vamec

Vamec srl is active in karting for over 30 years and has established itself in worldwide with important victories of Tryton diaphragm carburetors

Vamec srl was born from the karting experince of Vincenzo Vannini, who took his one's first steps in this sport in the distant 1968, first as a pure passionate, then as a pilot. At that time, as in his group was the only one with a job in metal mechanics, many friends turned to him for the overhaul of engines and technical advice, so decided to undertake the business of preparer and mechanic in national and international races. In those years were used components not entirely specific for the karting area, because we relied to parts destined for mass markets such as road motorcycles or parts for agricultural machinery, which were very far from being able to ensure the performance that kart racing required.

Vamec srl follows nearly the technological evolution of design and production systems that allow to achieve standards of quality in year to year always higher

So it was that in the early 90 years Vannini decided to give his own definition to the design and construction of specific material for kart racing, first realizing diaphragm carburetors Tryton, then expanding its range of products and accessories for chassis and engines. The design and realization of high performance products dedicated to the kart had become the mission of the Vamec, with the vision of increase with own technologies and innovations the kart's market.

24 products found in Vamec

Carburetor Check Tool
A005
  • $ 59.00 USD
Motoplat/Ducati Puller
A008
  • $ 84.00 USD

Sold out

Clutch Locking Wrench for KF2, X30 and X125 Engines
  • $ 48.00 USD
Clutch Puller for KF2 and LATE X30 engines
A449
  • $ 46.00 USD
PVL Ignition Puller KF
A478
  • $ 45.41 USD
Dual Purpose Chain Breaker - 219 and 428
A479-219/428
  • $ 90.00 USD
Kart and Motorcycle Tilt/Leveling Tool
A474
  • $ 250.00 USD
Racing Water Pump Assembly
A484
  • $ 120.00 USD
Crank Support Balancing Tool
A013
  • $ 450.00 USD
Professional Crankshaft Check Tool (Kart and Motorcycle)
A490
  • $ 2,500.00 USD
Crankshaft Disassembly Support Tool
A407
  • $ 265.00 USD
Crankshaft Assembly Tool with Bushings
A012
  • $ 850.00 USD
Crank Pin Bushing/Guide Tool
A390
  • $ 59.00 USD
Hydraulic Press
A110
  • $ 2,500.00 USD
Manual Tire Gauge - 2.5 BAR / 35 PSI
A109
  • $ 115.00 USD
Reduction for Carburetor Check Tool
A475
  • $ 14.77 USD
Professional Carb Control Check Pump - Red
KM124
  • $ 196.00 USD
Hand Pump to Remove Fuel from Carb
IM-Handpump
  • $ 15.99 USD
Chain Breaker - 219
A479-219
  • $ 45.00 USD
Chain Breaker - 428
A479-428
  • $ 45.00 USD
Chain Breaker - 35
A479-35
  • $ 45.00 USD
Dual Purpose Chain Breaker - 219 and 35
A479-219/35
  • $ 90.00 USD
Professional Carb Control Check Pump - Blue
A081
  • $ 196.00 USD
Radiator Hose Cutter
K2050
  • $ 49.99 USD